When the facts count.

Technical Data

Control Panel

  • Frames from 16 + 8 faders to 96 + 8 faders, with doubled fader bay up to 192 + 8 faders
  • 6 banks per 2 layers, 2 layers in direct access. Iso-Bay for isolated bank/layer switching.
  • 100mm faders + 10 rotary controls, Channel Display for every fader with sense-triggered change of module display in the Channel Display
  • Up to 5U 19’’ integration
  • Danner format integration

Signal Processing

  • 512 channels and 144 summing buses, 40 bit floatingpoint
  • Surround formats: DTS/Dolby Digital 5.1, Dolby Pro-logic 4.0, DTS ES / Dolby EX 6.1, SDDS 7.1, Lawo 7.1, diverse panning characteristics
  • 2*AFL: 1*surround 8-channel, 1*stereo
  • 2*PFL stereo
  • 32 aux sends
  • Audio-follow-video with 128 events, control either via Remote MNOPL or via GPI, adjustable envelope up to 10 s fade time
  • Solo In Place
  • Permanent input measuring point in the fader, adjustable measuring points INPUT, PF, AF, DIROUT in the Channel Display
  • Modules: Inmix, Digital Amp, 2-band fully parametric Filter, 4-band fully parametric EQ, 2-band fully parametric Sidechain Filter, Insert, Delay up to 1800 ms, units in m, ms and frm (adjustable fps), Expander, Gate, Compressor, Limiter, Image, Meter, Direct Out

Routing Matrix

  • Up to 8192 crosspoints
  • 96 kHz, 24 bit
  • Fully redundant signal path

Interfaces

  • Mic/Line, Line Out, AES, SDI, MADI, ATM, GPIO, serial, MIDI, Riedel Intercom, ADAT® (ADAT® is a registered trademark of Alesis, LLC and is used here under license).
  • Monitoring systems stereo and surround

Synchronisation

  • 2 redundant inputs with automatic detection of Blackburst, Wordclock, AES3, optionally also MADI

Redundancies

  • PSUs, DSP boards, router board
  • Fully redundant signal path
  • PSU for control system and control panel

Control

  • Iso-Bay with separate layer and bank switching as well as 2nd PFL/AFL bus, real 2-engineer operation
  • Mix-minus control with 2 conference systems
  • Diverse tally- and faderstart modes
  • Programme switch
  • Machine control
  • Audio-follow-video
  • Manifold T/B integration
  • External control of Lawo mic-amps via Yamaha GP channels
  • Dynamic TC automation
  • Sequence automation with trim functionality and offset of individual parameters
  • Direct backup of production data on USB or network

External Control Systems

  • Remote control via network
  • External matrix controller BFE, VSM, Jupiter

Remote Maintenance

  • Connection via ISDN or VPN
  • Software updates, error diagnostics, remote



    • Subject to change without prior notice, no responsibility is taken for the correctness of the details provided.